BREEZECOM SA-10 PRO Card Type Network Interface Card NIC Type Ethernet Boot ROM Not available Radio Data Rate 3Mbps Network Transfer Rate 1.6Mbps Topology Ad-hoc, infrastructure Wiring Type Unshielded twisted pair Data Bus External [Image] CONNECTIONS Function Label Function Label RJ-45 UTP connector CN1 DC power connector CN3 Monitor connector CN2 DIAGNOSTIC LED(S) LED Color Status Condition LED1 Unidentified On Power is on LED1 Unidentified Off Power is off LED2 Unidentified Blinks Radio interference is present LED2 Unidentified Off No radio interference LED3 Unidentified On Data is being transmitted over Ethernet LED3 Unidentified Off Data is not being transmitted over Ethernet LED4 Unidentified On Receiving traffic from 9 or more stations LED4 Unidentified Off Receiving traffic from less than 9 stations LED5 Unidentified On Receiving traffic from 5-8 stations LED5 Unidentified Off Receiving traffic from less than 5 stations LED6 Unidentified On Receiving traffic from 1-4 stations LED6 Unidentified Off No traffic being received MISCELLANEOUS TECHNICAL NOTES Unit may have two pre-installed antenna, or configured with two connectors for external antenna.